lol竞猜软件

 
在校生 教职工 考生及访客 校友 EN
师资队伍
首页-师资队伍-博后队伍
博士后人员信息
博士后人员

仝大明

 

毕业于lol竞猜软件,主要研究方向包括热处理过程的数值模拟,热处理变形和残余应力研究,感应淬火工艺设计与开发。致力于热处理智能化方面的研究工作,曾参与了核电转子、大型锻件、曲轴、齿轮等多种零件的制造工艺研发。参与开发了国内第一款热处理数值模拟软件Thermal Prophet,大幅提高了热处理成功率,显著降低了研发成本。 

电话:021-34203743
邮箱:284980734@qq.com

合作导师:顾剑锋


杨继兰

 

从事专业:先进高强度钢

学习与工作简历:
2017年11月---至今,英雄联盟比赛押注app 博士后
2012年9月---2017年9月,英雄联盟比赛押注app  博士

研究方向一:先进高强度钢的设计及表征
研究方向二:电化学腐蚀行为及表征

电话:15221098997
E-mail:yanglan1021@163.com

合作导师:顾剑锋


Ashfaq Ahmad

Post Doctor

 

Research Interests; Physics; magnetic materials, catalysts, Nanotechnology, nanoparticles, Magnetic hyperthermia, MRI

Education:

PhD Physics, Kyungpook National University, South Korea, 2018
M.S Physics, COMSATS University, Islamabad, Pakistan, 2012

I am currently working as postdoc fellow in the Department of materials science and engineering at SJTU in Prof Fang Song Laboratory. Prior to this, I was working as an Assistant professor at Women University Swabi, Pakistan. My research interests include dimensionally controlled synthesis of nanomaterials (magnetic nanoparticles, electrocatalysts)  for bio-medical and electrocatalytic applications.

Phone: 13061793540
Email: Ashfaq@sjtu.edu.cn

Supervisor: Fang Song/宋钫


Atta ur Rahman

 

Dr. Atta ur Rahman holds Ph.D. degree in nano-materials from Department of Metallurgy and Material Engineering PIEAS Islamabad in 2014. His doctoral research focused on the structural, magnetic and electron transport Properties exhibited by the nano sized Inverse spinel ferrite. In 2014-15 he joined department of Physics AWK University Mardan (PAK) as Assistant Professor. He has also served as adjunct faculty member in University Lahore Pakistan.
He completed joined his first postdoctoral from SEIEE, SJTU IN Sept 2018. Currently he is working as postdoc fellow in SMSE under the supervision of Prof: Dr. Tongxiang Fan. His research project is related to the Designing, Simulation and Fabrication of Meta-materials for smart thermal control.

Phone:18202110732
Email:attaur@sjtu.edu.cn

Supervisor:Tongxiang Fan/ 范同祥


Behzad Sadeghi

 

Dr. Behzad Sadeghi has been with the Materials Science and Engineering as postdoctoral researcher in SJTU since 2018. He received a PhD. degree from Isfahan University of Technology in Iran, and a M.Sc. degree from the Tarbiat Modares University in Iran.
His research interests are primary in the field of microstructure-property relationships in advanced engineering materials especially aluminum matrix composites. Areas of research include advanced materials, aluminum alloys, advanced metal-matrix composites, High entropy alloys.

I have rich experience of Flake powder metallurgy technique, Severe plastic deformation techniques such as ECAP, HPT, etc, Fast assistant sintering such as Spark Plasma Sintering (SPS), Hot extrusion, Hot/Cold rolling process, Solid state joining such as Friction stir welding (FSW), making surface nanocomposites through Friction stir processing (FSP) and also producing high entropy alloys by PM.
During my Ph.D. period, I worked on the fabrication of bimodal reinforced Al-based composites produced via SPS. The joining of the fabricated nanocomposites was carried out using friction stir welding. Right now, I am working on the bulk CNT-Al composites fabricated by flake powder metallurgy via micro/macro rolling as a smart and practical route.
He has published over thirty peer-reviewed papers, with recent publications in the area of hot rolling of CNT/Al nanocomposites produced by SPS. Dr. Sadeghi has also been involved with the international material science community, serving as reviewer of journal papers. Besides, he has published two chapter related to SPS and the composite fabricated by it.

Phone:13917041452
Email:b.sadeghi2020@gmail.com

Supervisor:Zhiqiang Li/ 李志强


Farhad Saba

 

Postdoc Researcher, State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai, China

Dr. Farhad Saba received his Ph.D. in Materials science and engineering from Ferdowsi University of Mashhad (FUM) in 2017. Furthermore, he received B.S. degree in Materials Science and engineering from FUM in 2009 and also received his M.S. degree in the same field from University of Tehran in 2013. During Ph.D., he joined Southeast University (Nanjing, China) and worked for 6 months as a short research visitor in 2015. His PhD thesis focused on ‘’pulsed current ?eld assisted surface modi?cation of carbon nanotubes with nanocrystalline titanium carbide and using them as reinforcing agents in Al matrix composites’’. He has published around 20 articles in high-level/high-impact journals including CARBON, CERAMICS INTERNATIONAL, COMPOSITES PART A, RSC ADVANCES and so on. His research interest lies in the functionalization of nanostructured materials, specifically carbon nanotubes, and their application as reinforcements in metal matrix composites (MMCs). He currently works as a Postdoctoral researcher in State Key Laboratory of Metal Matrix Composites, School of Material Science and Engineering, Shanghai Jiao Tong University, Shanghai, China.

Tel: 86-13061620271 
Email:Farhaad.saba@gmail.com farhad.saba@sjtu.edu.cnWebsite:https://www.researchgate.net/profile/Farhad_Saba3https://scholar.google.com/citations?user=chygiKUAAAAJ&hl=en

Supervisor:Zhiqiang Li/李志强


Hafeez Ur Rehman

 

Hafeez Ur Rehman (Ph.D.) belongs to the Islamic Republic of Pakistan. Currently, he is working in the SMSE as a Post-doctoral Research since 01-2019. Before joining SMSE, Dr. Rehman worked under the supervision of Professor Hezhou Liu as a Ph.D. researcher. He was amongst the excellent international students of SMSE, and SJTU during the session 2017-18. He published his scientific work in leading scientific journals of Advanced Functional Materials and Materials & Design, etc. Dr. Rehman is currently working on hydrogel/helical bundle composites with the abilities of self-healing and high-speed actuation at high loading. He has a passion for learning about polymer materials and their applications. Therefore, he often participates in knowledge-based activities.


Phone:18217251067
Email:hafeez.icp@gmail.com

Supervisor:Hezhou Liu/刘河洲


Imran Zada

 

Postdoctoral researcher, received Ph.D from Shanghai Jiao tong university, school of materials science and engineering in 2018. Mainly engaged in the fabrication of bio-inspired antireflective structure materials and Photothermal conversion materials for high efficiency solar vapor generation. Have published 16 SCI papers as the first and coauthor. Due to the innovativeness and novelty of his research work, more than 20 professional international scientific technology media, including Science Daily, MRS Bulletin, Phys. Org, Eurekalert, Optics & Photonics, etc. have reported, reproduced and evaluated his research papers. Due to his excellent research work during PhD, he has been awarded with “Excellent international student award (First prize) for the year 2016-2017 (SMSE@SJTU), first prize International Student award for the year 2017 and outstanding graduate of the year 2018 by shanghai jiao tong university. Currently, he has been selected for the project “Postdoctoral International Exchange Program” for the year 2018-2020 and participated in three more projects as a key member.


Tel: +86-18201852991
Email: imranzada99@gmail.com

Supervisor:Di Zhang/张荻
Platform: Institute of Composite Materials


Sravan Baddi

 

Dr. Sravan Baddi, did his research work at Council of Scientific & Industrial Research- Indian Institute of Chemical Technology (CSIR-IICT) and received his Doctoral Degree from Osmania University (INDIA) in 2018. From June 2019 onwards he started working as a Post-Doctoral fellow with Prof. Chuan Liang Feng in the School of Material Sciences and Technology, Shanghai Jiao Tong University (SJTU). His research mainly focuses on design and synthesis of novel multi-functional chiral supramolecular and polymeric hydrogels for biomedical, tissue engineering, and pharmaceutical application.


Phone:13004313657
Email: sravan.baddi@gmail.com

Supervisor: Chuanliang Feng/ 冯传良


Tahir Muhmood

 

Dr. Tahir Muhmood, currently working as “Professional Postdoc Researcher/Research Assistant” at “State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering (SMSE) "Shanghai JiaoTong University" (金属基复合材料国家重点实验室,lol竞猜软件) Shanghai, P.R.China. He obtained his Doctor degree in “Chemical Engineering & Technology” fr